3
8
FW-D030-P-MAN-EN-V0102_02
CHAPTER
Installation Instructions
Mechanical Installation
To extend life of your unit:
• Mount the D030-P on a solid base to avoid vibrations.
• Provide sufficient slack on cables to prevent stress on cable entries.
• Make sure the seal is mounted properly between the housing and the panel.
• The IP66, IP67 (NEMA4X) classification is valid for the front enclosure only.
• Do not expose the casing to strongly varying (weather) conditions, not even when rated IP67.
Note:
This section describes various hardware configurations of the D030-P. Your particular
model of the D030-P may not support all configuration options described.
Figure 3:
Mechanical mounting precautions
Figure 4:
Panel cut-out dimensions
@@Panel cut-out dimensions D-series
68m
m
(2
.68"
)
138 mm (5.43")
10.2 mm (0.4”)
72
(2.
8
3”)
144 mm (5.67”)
55,3mm (2.18”)
15,6mm (0.61”)
