FLIR B6 series, User Manual

Page: 93 / 326

14.6 Using the pan function
General When you have zoomed into an image, you can pan over the image. This enables
you to specify the area of interest before you save the image again.
Procedure
Follow this procedure to use the pan function:
When the image is in preview mode or archive mode, select Zoom/Pan in
the toolbox.
1
Push the joystick to go to pan mode. 2
To pan over the image, push the joystick left/right or up/down. 3
NOTE When you save the image again, the pan factor will be saved too.
Related topics For locations of camera buttons, see section 9 – Camera parts on page 21.
14
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
75
14 – Working with views and images