FLIR B6 series, User Manual

Page: 111 / 326

How to set up a
fusion type
Follow this procedure to set up a fusion type:
1
To go to the mode selector, push the button to the right of the joystick.
In the mode selector, select Camera and push the joystick.
2
To set up a fusion type, select Fusion in the toolbox and push the joystick. 3
In the Fusion box, select one of the following:
■
Above
■
Below
■
Interval
■
Picture in Picture
4
Push the joystick to confirm the choice. 5
Do one or more of the following:
■
If you chose Above or Below , move the joystick up or down to adjust
the temperature level. The temperature level is displayed as a 'flag' that
slides along the temperature scale. See the figure below.
■
If you chose Interval , do one or more of the following:
■
Push the joystick up/down to move the interval up/down.
■
Push the joystick left/right to increase/decrease the interval.
■
If you chose Picture in Picture , do one or more of the following:
■
Push the joystick left/right or up/down to resize the infrared image
frame.
■
Push the joystick once and then push the joystick left/right or up/down
to move infrared image frame.
■
Push and hold down the joystick for more than one second to center
the infrared image frame.
6
To deactivate Fusion , repeat Step 4 above and select Off . 7
NOTE
When using fusion, you can also change temperature levels, and the size and position
of the infrared image frame, after you have saved the image. You can also do this in
FLIR Reporter.
15
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
93
15 – Working with fusion