FLIR B6 series, User Manual

Page: 150 / 326

22.1.2 Changing image enhancement filters
General
Image enhancement filters have an effect on adjustment and enhancement of the
infrared images.
The most suitable filter for a certain application depends on many different factors,
such as target temperature and emissivity, reflected apparent temperature, distance
to target, etc. You will need to test different filters in order to find one that suits your
application the best.
Procedure Follow this procedure to change settings for image enhancement filters:
To go to the mode selector, push the button to the right of the joystick.
1
In the mode selector, select Setup and push the joystick.
2
In the toolbox, select Image enhancement and push the joystick. 3
To change the level of noise reduction, select Noise reduction and push
the joystick.
4
To confirm and leave the dialog box, push the button.
5
Related topics
For locations of camera buttons, see section 9 – Camera parts on page 21.
22
132
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
22 – Changing settings