FLIR B6 series, User Manual

Page: 37 / 326

8 A note about ergonomics
General To prevent overstrain injuries, it is important that you hold the camera ergonomically
correct. This section gives advice and examples on how to hold the camera.
NOTE Please note the following:
■
Always tilt the viewfinder to fit your work position.
■
Always adjust the viewing angle of the display to fit your work position.
■
Always adjust the camera grip to fit your work position.
■
When you hold the camera, make sure that you support the camera housing with
your left hand too. This decreases the strain on your right hand.
Figure
10753903;a1 10754003;a1
10754203;a1 10754103;a1
8
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
19