FLIR B6 series, User Manual

Page: 123 / 326

Procedure
Follow this procedure to change the object parameters globally:
To go to the mode selector, push the button to the right of the joystick.
1
In the mode selector, select Camera and push the joystick.
2
To change the object parameters, do the following:
1 In the toolbox, select Object parameters .
2 Push the joystick.
3 Do one of the following:
■
To restore default values, select Restore default and push the joystick.
■
To change values for the object parameters, use the joystick. Push
the joystick to confirm each choice.
■
To make the global parameters override any local parameters, select
Override local parameters and push the joystick.
3
To confirm and leave the dialog box, push the button.
4
NOTE
Of the seven parameters above, emissivity and reflected apparent temperature
are the two most important to set correctly in the camera.
■
■
To change object parameters locally , first select a measurement tool in the toolbox,
then select Use local parameters . Change the local parameters by selecting Edit
local parameters , then edit them in the same way as for global object parameters.
Related topics
■
For in-depth information about parameters, and how to correctly set emissivity
and reflected apparent temperature, see section 32 – Thermographic measurement
techniques on page 263.
■
For locations of camera buttons, see section 9 – Camera parts on page 21.
16
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
105
16 – Working with measurement tools