FLIR B6 series, User Manual

Page: 132 / 326

In the toolbox, select one of the following:
■
Dewpoint
■
Relative humidity
■
Insulation
3
To activate the alarm, do the following:
1 Select Active
2 Push the joystick.
3 Move the joystick up/down and select
On .
4 Push the joystick.
4
For each parameter, enter a value according to the previous step. 5
To confirm and leave the dialog box, push the button.
An alarm will now be triggered when the conditions you have set for the
alarm are met.
6
NOTE When a building alarm is activated, all other measurement tools are inactivated.
SEE ALSO
■
For information about the theory behind dewpoint alarms, see section 28.4.7 –
Humidity & dew point on page 222.
■
For information about the theory behind insulation alarms, see section 28.4.8 –
Excerpt from Technical Note ‘Assessing thermal bridging and insulation continuity’
(UK example) on page 222.
18
114
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
18 – Working with alarms