Flexim FLUXUS WD, Operating Instruction

Page: 74 / 174

9 Measurement
9.1 Parameter input
FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
74
• Select
Select transducer
to use the standard transducer stored in the transmitter.
• Select the transducer.
• Press ENTER.
This display will only be indicated if the transducers and the sensor module are connected to the transmitter.
9.1.2 Input of pipe parameters
Outer pipe diameter
• Enter the outer pipe diameter.
• Press ENTER.
It is possible to enter the pipe circumference instead of the outer pipe diameter.
Pipe circumference
• Activate the input of the pipe circumference.
• Press key
in the menu item
Outer diameter
. The menu item
Pipe circumference
will be displayed.
• Enter the pipe circumference.
• Press ENTER.
If the outer pipe diameter is to be entered, press key
. The menu item
Outer diameter
is displayed.
Pipe material
The pipe material has to be selected to be able to determine the corresponding sound speed.
The sound speeds for the materials in the scroll list are stored in the transmitter.
• Select the pipe material.
• Press ENTER.
• If the material is not in the scroll list, select
Other material
.
• Press ENTER.
Parameters\Select transducer
Notice!
If a standard transducer is selected, no transducer-specific calibration values are considered. A higher uncertainty
has to be expected.
Parameters\Outer diameter
Parameters\Pipe circumference
Parameters\Pipe material