Flexim FLUXUS WD, Operating Instruction

Page: 137 / 174

17 Advanced functions
FLUXUS WD 17.7 Event trigger
137
UMFLUXUS_WDV1-3EN, 2018-07-16
Not for calculation
This function enables the user to define an event-based channel selection for calculation channels.
• Select the list item
Not for calc.
• Press ENTER.
If the condition for the remote function is met, this measuring channel will not be calculated in the calculation channel. The
measurement on the measuring channel continues running. The source of this remote function can be an event trigger or
a process input.
The measuring channel is available again in the calculation channel, if the condition for the remote function is no longer
met.
• Select the input which is to be used to trigger the selected remote function.
• Press ENTER.
• Select
No linkage
in order to deactivate the remote function.
• Press ENTER.
17.7 Event trigger
It is possible to configure max. 4 independent event trigger
R1, R2, R3, R4 per channel.
The event trigger can be used to:
– output information about the ongoing measurement
– trigger special remote functions
– switch on/off pumps and motors
• Select the program branch
Options
.
• Press ENTER.
• Select the event trigger.
If an event trigger has already been installed, it is displayed as follows:
Rx(+)
.
• Select
Yes
to change the settings for an already assigned event trigger or to assign a new one.
• Select
No
to cancel the assignment and to return to the previous menu item.
• Press ENTER.
• Select the source item (physical quantity) for which a condition has to be defined (see Tab. 17.4).
Options
Channel x
Event trigger
Select RX
Enable Rx
Source item
Define the function
see annex A, p. 160
Options\Channel x\Event trigger\Rx(-)
Options\Channel x\Event trigger\Enable Rx
Options\Channel x\Event trigger\Enable Rx\Source item