Flexim FLUXUS WD, Operating Instruction

Page: 10 / 174

2 Safety instructions
2.7 Safety instructions for transport
FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
10
2.7 Safety instructions for transport
• If you detect a transport damage when unpacking the delivery, please contact the supplier or FLEXIM immediately.
• The transmitter is a sensitive electronic measuring instrument. Avoid shocks or impacts.
• Handle the transducer cable with care. Avoid sharp bends or kinks. Observe the ambient conditions.
• Select a solid surface to put the transmitter, transducers and accessories on.
• The transmitter, transducers and accessories have to be properly packed for transport:
– Use, if possible, the original packaging by FLEXIM or an equivalent cardboard box.
– Position the transmitter, transducers and accessories in the middle of the cardboard box.
– Fill any voids with appropriate packaging material (e.g., paper, foam, bubble wrap).
– Protect the cardboard box against humidity.
2.8 Recommended procedure in hazardous situations
Fire fighting measures
• If possible, disconnect the transmitter from the power supply.
• Prior to extinguishing, protect any electrical parts that are not affected by the fire (e.g., using a cover).
• Select a suitable extinguishing agent. Avoid, if possible, conductive extinguishing agents.
• Observe the applicable minimum distances. The minimum distances differ depending on the used extinguishing agent.
Fig. 2.1: Transmitter FLUXUS WD
A B
SNAP
DISP
DISP
MODE FAST
MUX
NEXT
Q
ON
Q+ Q-
3x Q
OFF
LAN USB
A+ B- P1+ P2+ P3+ P4+ P5a P6a P7a
S S P1- P2- P3- P4- P5b P6b P7b
X2 X3
X_AV
KL1
1
KL12 KL7
KL8
KL9
KL10
KL4
X_AR X_BV X_BR
T1A T1B S1 T2A T2B T3A T3B S3 T4B T4A
T1a T1b S1 T2a T2b T3a T3b S3 T4b T4a
N(-) PE L(+)
AV AV
S
AGN ARS AR BV BVS BGN BRS BR
front plate