Flexim FLUXUS WD, Operating Instruction

Page: 55 / 174

7 Connection
FLUXUS WD 7.1 Transducers
55
UMFLUXUS_WDV1-3EN, 2018-07-16
7.1.3 Connection of the transducer cable to the junction box
• Remove the blind plug for the connection of the transducer cable, see Fig. 7.4.
• Open the cable gland of the transducer cable. The compression part remains in the cap nut.
• Push the transducer cable through the cap nut and the compression part. Prepare the transducer cable.
• Shorten the external shield and brush it back over the compression part.
• Screw the gasket ring side of the basic part into the junction box.
• Insert the transducer cable into the junction box.
• Fix the cable gland by screwing the cap nut onto the basic part.
• Connect the transducer cable to the terminals of the junction box, see Fig. 7.4 and Tab. 7.3.
Tab. 7.2: Terminal assignment
terminal connection
AV white or marked cable (core)
AVS white or marked cable (shield)
ARS brown cable (shield)
AR brown cable (core)
Fig. 7.3: Connection of the extension cable to the transmitter
1 – cap nut
2 – compression part
3 – basic part
4 – external shield brushed back
5 – extension cable
Notice!
For good electromagnetic compatibility (EMC), it is important to ensure good electrical contact between the external
shield and the cap nut (and thus the housing).
A B
SNAP
DISP
DISP
MODE FAST
MUX
NEXT
Q
ON
Q+ Q-
3x Q
OFF
LAN USB
A+ B- P1+ P2+ P3+ P4+ P5a P6a P7a
S S P1- P2- P3- P4- P5b P6b P7b
X2 X3
X_AV
KL1
1
KL12 KL7
KL8
KL9
KL10
KL4
X_AR X_BV X_BR
T1A T1B S1 T2A T2B T3A T3B S3 T4B T4A
T1a T1b S1 T2a T2b T3a T3b S3 T4b T4a
N(-) PE L(+)
AV AV
S
AGN ARS AR BV BVS BGN BRS BR
cable gland
1 2 3
70
m
m
20
m
m
10 mm
4
5
5