Flexim FLUXUS WD, Operating Instruction

Page: 144 / 174

18 Settings
18.2 Measuring modes
FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
144
Toggle time
The toggle time indicates the time interval after which the transmitter (operating in AutoMux mode) toggles between the
different channels during the measurement. The default value is 3 s.
• Select the menu item
Toggle time
.
• Enter a different toggle time value if the default value is no to be used.
• Press ENTER.
This value remains stored until a new toggle time is entered.
Switching off the display backlight
• Select
Yes
to activate the automatic switch-off.
• Press ENTER.
If the automatic switch-off of the display backlight is activated, the backlight is switched off after about 30 s. When press-
ing a key or connecting a USB cable, the backlight is switched on again.
18.2 Measuring modes
• Select the menu item
Measurement
in the program branch
Special functions
.
• Press ENTER.
• Select the menu item
Measurement modes
.
• Press ENTER.
FastFood mode
• Select
On
to enable the measurement in the FastFood mode or
Off
to disable it.
• Press ENTER.
18.3 Measurement settings
• Select the menu item
Measurement
in the program branch
Special functions
.
• Press ENTER.
• Select the menu item
Measurement settings
.
• Press ENTER.
Special functions\Dialogs/Menus\Toggle time
Special functions\Dialogs/Menus\Light autom. off
Special functions\Measurement\Measurement modes
Special functions\Measurement\Measurement modes\Enable FastFood
Special functions\Measurement\Measurement settings