17 Advanced functions
17.6 Remote functions
FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
136
Reset of measured values
• Select the list item
Reset meas. val.
• Press ENTER.
The measured value output simulates a reposing application for the duration of the signal. The actual measured flow ve-
locity is ignored and the measured value is set to zero. All values of the physical quantity derived from the flow velocity
and the values from the calculation channels also yield to zero.
The transmitter continues the measurement if the condition of the remote function is no longer met.
• Select the input which is to be used to trigger the selected remote function.
• Press ENTER.
• Select
No linkage
in order to deactivate the remote function.
• Press ENTER.
Reset of the totalizers
• Select the list item
Reset totalizers
.
• Press ENTER.
The totalizers are set to zero.
Totalizing starts at zero again, as soon as the condition for the remote function is no longer met.
When the totalizers are reset to zero with the remote function, the character
H
is displayed next to the measured value
during the measurement.
• Select the input which is to be used to trigger the selected remote function.
• Press ENTER.
• Select
No linkage
in order to deactivate the remote function.
• Press ENTER.
Stop of the totalizers
• Select the list item
Stop totalizers
.
• Press ENTER.
The totalizers are stopped for the duration of the signal.
Totalizing will be continued with the last registered totalizer value if the condition of the remote function is no longer met.
• Select the input which is to be used to trigger the selected remote function.
• Press ENTER.
• Select
No linkage
in order to deactivate the remote function.
• Press ENTER.
Activation of the FastFood mode
• Select the list item
Activate FastF
.
• Press ENTER.
The FastFood mode is activated for the duration of the signal. The FastFood mode is deactivated as soon as the condition
for the remote funcion is no longer met.
This list item is only available for measuring channels and only appears if the FastFood mode was activated in menu item
Special functions\Measurement\Measurement modes\FastFood
.
• Select the input which is to be used to trigger the selected remote function.
• Press ENTER.
• Select
No linkage
in order to deactivate the remote function.
• Press ENTER.
Summary of Contents for FLUXUS WD
