Installation
Transport
Fisher Scientific
Peltier Low Temp. Incubators 3-5
Transport
Humidity
After transport or storing under humid conditions a drying-out
process must be performed. During the drying-out process the
equipment cannot be assumed to meet all the safety
requirements of the IEC 61010-2-010 standard. The drying-out
period is xx hours.
Table-top low temperature incubators
For transport, do not lift the low temperature incubator using the doors or components
attached to the low temperature incubator as lift points.
Figure 3-3 Lift Points
Heavy loads! Lift with care!
To avoid injury through physical strain, such as strain traumata
and slipped discs, do not attempt to lift the low temperature
incubator alone!
To avoid injury through dropped loads, be sure to wear Personal
Protection Equipment, such as safety shoes, when lifting the low
temperature incubator.
To avoid crushing your fingers or hands (particularly in a closing
door) or damaging the low temperature incubator, do not use any
other lift points than those indicated in the illustration above.
Summary of Contents for Isotemp 178L 120V
