Fisher Scientific Isotemp 178L 120V, User Manual

Page: 39 / 92

Fisher Scientific Peltier Low Temp. Incubators 5-1
5
Installation procedures
Table-top Peltier low temperature incubators
Installing the Shelf System
The installation of the shelf system does not require any tools. The support rails are secured in
place by spring action. Once the shelf support brackets have been inserted into the rails, the
perforated shelves can be simply pushed onto their support hooks to complete the installation.
The support rails of the floor stand low temperature incubators
cannot be removed.
Initial Installation
1. Peel off the protective foil from the support rails.
2. Push the retaining spring [1] into the guide on the support rail [2], making sure that the
locking nub [3] on the retaining spring safely engages with the matching hole in the
support rail.
.
Figure 5-1 Sliding the Retaining Spring into the Support Rail