Handling and Control
Temperature Set Value
7-6 Peltier Low Temp. Incubators
Fisher Scientific
Temperature Set Value
Fisher Scientific low temperature incubators allow for setting the desired work space
temperature directly using only a few button presses. After confirming the new temperature
set value, you may trace the resulting temperature change in the temperature display field
(item D1 in
figure 7-1
on
page 7-1
.
Table 7-4 Adjusting the Temperature Set Value
Press
to activate the menu bar, then use
to
select the
Temperature
icon and press
to confirm.
In the temperature display pane, press
or
to
adjust a new temperature set value, then press
to
confirm your settings.
The display returns to its default mode.
The actual temperature measured in the work space
and shown in the temperature display area starts to
change until it reaches the newly adjusted set value.
Summary of Contents for Isotemp 178L 120V
