FICEP 1001 DFB, Programming And Operating Manual

Page: 96 / 226

Programming and operating manual Model 1001 DFB
96 FICEP S.p.A.
Test working
1001 DFB line is able to operate without material to check a program; to do that it is necessary that the
drilling sensitive cycle is disabled.
To check a program follow this procedure:
1) Select TEST ON by pressing soft-key n. 01 of the drilling unit
2) Disable, if activated, the drilling sensitive cycle by pressing the soft-key n. 19 of the drilling unit
3) Press “Start Cycle” of the main push-button panel
N.B. When the line is in Test mode, in the execution window, at the beginning of canonic program, a yel-
low bar is shown displaying a clearly message.
Operator parameters for basic operations
Pressing the graphic push-button “Parameters” in the “Execution” screen, a window opens to allow fine
tuning of some values for basic operations.
Name of
parameter
Measuring
unit
Meaning
GEN497 mm Backing space of the blade when in up/down mode (see saw softkeys on
page n. 34)
GEN498 mm Correction factor: the CNC add this value to the web height to get the height
where it must start the up/down movement of the blade. The value can be
positive or negative.
GEN521 % Percentage reduction of blade let down speed
GEN571 mm Thickness of material non sawed during initial cut to avoid the cut piece falls
into the machine
TMP017 s How much time the drilling unit must stay during a drilling operation to allow
chip break
TMP018 s How much time the drilling unit must penetrate into the material during a point-
ing operation (instruction POINT_37)
TMP345 s How much time the system must wait to consider well open/closed the holders
of material of the cutting unit
TMP361 s How much time the marking character of a disk marking unit must stay on
material; more this time is bigger and more the stamp is deep
DBL002 mm/min Forward speed of the blade; read-only field
DBL013 number Special field to enter some numerical codes to unlock some special functions
of the machine. Reserved to FICEP technicians