FICEP 1001 DFB Programming And Operating Manual Download Page 215

Page: 215 / 226

MACHINE SET-UP

FICEP

1001 DFB

Drilling & Sawing Line

Page 4-31

4.6.7

Lube-cooling of the drill

The machine is supplied complete with a pneumatic system for the lubrication and

cooling of the drill.

4.6.8

Cleaning operations

When cleaning/maintenance operations are required, before getting near the

machine, we recommend always to switch the machine off by opening the main

breaker of the electric board.

Every three weeks

It is recommended to remove the covers from the machine to perform the cleaning

of filters placed on the air intake of:

the electric board placed on the machine

the electric board placed on the carriage.

To remove the filter it is necessary to remove the plastic protecting air grating (no

need to open the electric panels).

Every three weeks

It is necessary to clean the filters on the air intake of:

the CNC box

the saw panel

the main electric board.

All the above filters are directly accessible.

Summary of Contents for 1001 DFB



































































































































































































































Search results

Summary of Contents for 1001 DFB

Reviews:

Brands by name

Popular brands

FICEP 1001 DFB, Programming And Operating Manual

Search results

Summary of Contents for 1001 DFB

Reviews:

Brands by name

Popular brands