FICEP 1001 DFB, Programming And Operating Manual

Page: 159 / 226

FEATURES
FICEP
1001 DFB
Drilling & Sawing Line
Page 2-11
2.4 Electrical equipment
The electrical equipment consists of one control cabinet, the machine
wiring, and the devices of control and of interface with operator.
The electric cabinet complies with the following directives (in the version in
force at the machine shipment date):
Machinery Directive
Low-voltage Directive
EMC Directive
and more precisely to the EN60439-1 (IEC 60439-1) Standards.
Machine wiring, control devices and operator interface comply with the
EN60204-1 (IEC 60204-1) Standards. We have also taken into
consideration the following standards EN12100-1, EN12100-2, EN13850,
EN894-1, EN894-2, EN954-1, EN 50370-1, EN 50370-2, EN14121-1 in the
version in force at the date of shipment of the machine.
The electric cabinet includes the Minosse CNC, drives for the brushless
motors, safety devices for the emergency stop and the photoelectric barrier
control, and all the necessary electric and electromechanical devices for
which please refer to the wiring diagram attached to the documentation.
Electric supply required characteristics:
 voltage
3 x 415 V AC tol/- 10%

frequency
50 Hz tol/- 1%
 total horsepower
38 kW

harmonic content
10%

voltage interruption

10 ms at nominal voltage

connection of PE conductor:
centralised next to main breaker
Attention use not permitted with IT power supply earthing , we
discourage the use of TNC ones and suggest the use of The TNS ones.
For additional information, please refer to relevant diagrams list (Refer to
DRAWINGS AND PRINTS REFERENCE NUMBERS at the end of
Section 2)