FICEP 1001 DFB, Programming And Operating Manual

Page: 13 / 226

Model 1001 DFB Programming and operating manual
FICEP S.p.A. 13
CNC controlled positioning
Introduction
1. In this manual the expressions “side A”, “side B”, “side C” and “side D” are often used; these expres-
sions refer to the profile sides as shown in the following pictures. Note that the “A” refers always to the
profile side on the datum line of the machine, “B” to the mobile vice reference, “C” to upper side and
“D” to lower side of the profile.
The pictures on the left are applicable for each type of profiles except angles; while those on the right
are valid only for angles.
2. In this manual, we call “axes” all the CNC automatic controlled movements.
Axes table
Name
Description Function

AXX Carriage axis for longitudinal positioning of material
Material handling AXP Pincher positioning axis to suit profiles height ( optional )
APE Magnet positioning axis for transferring of cut pieces ( optional )

AMM Mobile vice axis Material holding

AXY Traverse axis for the horizontal positioning of the drilling unit 1
Drilling
operations
(standard head)

AXZ Traverse axis for the vertical positioning of the drilling unit 1
MDY Spindle rotation axis (stationary vice side)
AXV Traverse axis for the horizontal positioning of the drilling unit 2 ( op-
tional )
Drilling opera-
tions (second op-
tional head)
AXW Traverse axis for the vertical positioning of the drilling unit 2 ( op-
tional )
MDZ Spindle rotation axis (mobile vice side) (
optional )
AP1 Probe axis on the stationary vice side ( optional )
Probing
operations
AP2 Probe axis on the mobile vice side ( optional )
A B
C
D
A
B
B A
C
D
B
A