FICEP 1001 DFB, Programming And Operating Manual

Page: 216 / 226

MACHINE SET-UP
Page 4-32
1001 DFB
Drilling & Sawing Line
FICEP
4.7 Recapitulation table of routine maintenance interventions
In the following table are resumed the routine maintenance interventions to
be scheduled on the line. Interventions frequency has been calculated in
working days of system operation.
code intervention description
frequency
(system working days)
notes
cleaning
D1 calamine removal from chains of loading and
unloading tables
20
D2 cleaning of sliding guides of carriage 20
D3 cleaning of pincher jaws 2
D4 cleaning of: photocells, reflectors, proximity
transducers, limit switches
2
D5 cleaning of working units area 1
lubrication
L1 transmission chains lubrication of loading /
unloading conveyors and infeed/outfeed
rollerways (and topping up if necessary)
30
L2 check of oil level in loading/unloading tables
reduction gears (and topping up if necessary)
120
L3 manual lubrication (on appropriate points) of
loading/unloading rollerways
60
L4 check of oil level in the carriage reduction gear
(and topping up if necessary)
120
L5 manual lubrication (on appropriate points) of
vices, hold down, rolls on the machine and
guides
60
L6 manual lubrication (on appropriate points) on
carriage guides
120
L7 check of oil level in loading/unloading tables
reduction gears (and topping up if necessary)
120
L8 fluid level check of drills lube cooling system 1
controls, tightenings, adjustments
C1 check of oil level in the hydraulic power unit 20
C2 check of lubrication system integrity, grease
arrival points and tightening of the inlet pipes
120
C3 tightening control of cams, proximity
transducers, limit switches, connectors,
terminals and insulating on electric equipment
60
C4 control of pipes tightening and check of wear
of flexibles on fluid systems
60
C5 driving belts control of positioning and
forward axes of the working unit
15