FICEP 1001 DFB, Programming And Operating Manual

Page: 67 / 226

Model 1001 DFB Programming and operating manual
FICEP S.p.A. 67
ATTENTION : This function is executable only if the drilling tool is long enough with refer-
ence to the transversal dimensions of the profile.
The G74 and G75 special functions simply activate and deactivate, respectively, the mirroring mode with
reference to X coordinate..
In the next program the CNC performs two holes with just a single drilling instruction.
LINE TYPE SIDE DIAMETER X Y DETAILS
001 MISC G74
002 DA 22.000 100 50 DRILL
003 MISC G75
N.B. The values of X and Y coordinates are not significant
In the following picture the practical output of the previous program.
Milling operations
OPERATION
TYPE
PROGRAMMING
CODE
EXAMPLE
Pocketing POCKET
Milling MILL
The pocketing operation consists in slow approach to the material surface for first material removal and in
further following passes to get the programmed depth.
The milling operation, instead, consists in fast approach until a predetermined coordinate beyond the ma-
terial surface and in the next cross movement to remove material at working speed. Milling operations can
be performed only starting from a hole with, at least, same diameter of the milling tool.
Both operations are programmed by two instructions: “LEAD” which defines the coordinates of starting
point and the type of operation (POCKET or MILL) and “CUT” which defines point-to-point the tool way.
100
50
100