FICEP 1001 DFB, Programming And Operating Manual

Page: 173 / 226

CONTROLS
FICEP
1001 DFB
Drilling & Sawing Line
Page 3-7
CNC push button control station – Drilling Unit
1. TEST It is used to simulate a no-load program, without any material
on the machine
2. M01 - If activated, the system executes the program and arrests the
working operations every time the command M01 is present
(programmed stop)
3. RLB It qualifies the true length pick-up of the bar to be processed
4. T.C. When the machine is not fitted with the Tool Change
(optional), it is used to position the drill head to the preset
coordinate for the tools change. If the marking unit (optional) is
present, it used to include the marking body and enable the manual
adjustment of the gaugeline
5. It qualifies the “rolls type vice”: when the carriage moves, the vice
keeps on closed on the section
6. It qualifies the use of the vice extension when processing of min.
size sections is required
7. It qualifies the min. C axis extended cycle
8. It qualifies the vertical clamping of the vice in AUTOMATIC
mode
9. It qualifies the vertical clamping extension of the vice. It enables to
control possible collisions.
10. It qualifies the vices vertical hold downs stand-by descent