A
Diagnostic messages
144
Festo – GDCP-CMMS-AS-G2-FW-EN – 1310NH – English
A
Diagnostic messages
A.1
Explanations on the diagnostic messages
If an error occurs, the motor controller CMMS-AS-...-G2 displays an error message cyclically in the sev-
en-segment display. The error message is made up of an E (for Error), a main index and a sub-index,
e.g.: “E 01 0”.
Warnings have the same number as error messages. In contrast to error messages, however, warnings
are preceded and followed by hyphens, e.g. “- 1 7 0 -”
The subsequent error tables include the following information:
Column
Significance
No.
Main index and sub-index of the diagnostic message.
Code
The Code column includes the error code (Hex) via CiA 402.
Message
Message that is displayed in the FCT.
Cause
Possible causes for the message.
Action
Action by the user.
Reaction
The Reaction column includes the error response (default setting, partially
configurable):
–
PS off (switch off output stage)
–
QStop (quick stop with parametrised ramp)
–
Warn (Warning)
–
Ignore.
Tab. A.1
Explanations of the error tables
The Reaction column includes the error responses of the default parameter set. After
configuration of the motor controller with FCT, the standard values defined in the FCT or
the configured reactions apply.
A complete list of the diagnostic messages corresponding to the firmware statuses at the time of print-
ing of this document can be found in section A.2
Summary of Contents for CMMS-AS-G2 Series
Page 173: ......