1
Safety and requirements for product use
14
Festo – GDCP-CMMS-AS-G2-FW-EN – 1310NH – English
1.2
Requirements for product use
•
Make this documentation available to the design engineer, installer and personnel responsible for
commissioning the machine or system in which this product is used.
•
Make sure that the specifications of the documentation are always complied with. Also consider the
documentation for the other components and modules.
•
Take into consideration the legal regulations applicable for the destination as well as:
–
regulations and standards,
–
regulations of the testing organizations and insurers,
–
national specifications.
1.2.1
Technical prerequisites
For correct and safe use of the product:
•
Comply with the connection and ambient conditions of the product specified in the technical data
Hardware description GDCP-CMMS-AS-G2-HW-..., Appendix A.1, and of all connected compon-
ents. Compliance with the limit values and load limits permits operation of the product in compli-
ance with the relevant safety regulations.
•
Observe the instructions and warnings in this documentation.
1.2.2
Qualification of the specialists (requirements for the personnel)
The product may only be placed in operation by a qualified electrotechnician who is familiar with:
–
installation and operation of electrical control systems,
–
the applicable regulations for operating safety-engineered systems,
–
the applicable regulations for accident protection and operational reliability, and
–
the documentation for the product.
1.2.3
Range of application and certifications
The motor controller with integrated STO safety function is a safety-related part of the control systems.
The motor controller carries the CE mark, standards and test values
Hardware description, GDCP-CMMS-AS-G2-HW-..., Appendix A.1.
The product-relevant EU directives can be found in the declaration of conformity.
Certificates and the declaration of conformity for this product
www.festo.com/sp
Summary of Contents for CMMS-AS-G2 Series
Page 173: ......
