FE MONITOUCH V8 SERIES, Reference: Additional Functions

Page: 79 / 508

6.2 Slider Switch
6-8
[Style] tab window
* Parts change can be executed by selecting an option on the [Modify Part] window.
Select a slider switch and select [Edit]
→
[Change Part]
→
[Modify Part]. The dialog shown below
is displayed. Select [Edit a rail] or [Edit a slider].
Define detent steps
by the size of the
item. When this check box is checked, the number of divisions for the rail is
automatically defined according to the size and scale value of the rail.
No. of Divisions
(2 to 1024) Specify the number of divisions of the rail.
If the size of the rail is smaller than the number of divisions, the rail is
divided into the number defined in the case where [ Define detent steps by
the size of the item.] is checked.
Scale Specify the setting range available for the slider switch. It is also possible to
make it variable by specifying the memory address.
Edit Parts
(Rail + Slide, Rail,
Slide) Select the part whose
design is to be changed.
Color Change the color of the part which is selected for [Edit Parts].
(This is valid only when [Rail] or [Slide] is selected.)
Change Part* Press this button to apply changes to the part selected for [Edit Parts].
For more information, refer to “3.6 Parts” in the V8 Series Operation
Manual.
Rail
Slide