manualshive.com logo in svg

FE MONITOUCH V8 SERIES, Reference: Additional Functions

Share
Download
FE MONITOUCH V8 SERIES Reference: Additional Functions Download Page 227

17.2    Two Ethernet Ports

17-6

Setting Procedure

IP Address Setting

Two IP addresses must be set for the built-in LAN port and the Ethernet unit.
Click [System Setting] 

→

 [Ethernet Communication] 

→

 [Local Port IP Address].

The [IP Address Setting] dialog is displayed.

For the built-in LAN port

Set the items in the [IP Address Setting] tab window for the built-in LAN port.

For the Ethernet unit

Set the items in the [IP Address Setting (extended)] tab window for the Ethernet unit port.

The included items are the same between the [IP Address Setting] and [IP Address Setting 
(extended)] tab windows.
For more information, refer to the V8 Series Connection Manual.

Summary of Contents for MONITOUCH V8 SERIES





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands