manualshive.com logo in svg

FE MONITOUCH V8 SERIES, Reference: Additional Functions

Share
Download
FE MONITOUCH V8 SERIES Reference: Additional Functions Download Page 126

10    RGB Display (touch switch emulation)

10-3

10

V-SFT Setting

1. Select [System Setting] 

→

 [Device Connection Setting] and select [Touch Switch].

2. Check the boxes for [ Use Touch Switch] and [ 2 Port].

3. Select an option for [Connect to:]

* Do not uncheck the box for [  Use Default Comm. Parameter Setting].

Limitations

• When the touch switch emulation of the RGB display function and the remote desktop window 

display function are used at the same time, a USB mouse cannot be used for the remote desktop 
window.

Both MJ1 and MJ2 must be used.
If either port is used for other purpose, this setting is not available.

GU-11 (Option Unit)

V-SFT Setting

Connection Port

RGB-IN1

Touch Switch (CH5)

MJ1/MJ2

RGB-IN2

Touch Switch (CH6)

Summary of Contents for MONITOUCH V8 SERIES





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands