FE MONITOUCH V8 SERIES, Reference: Additional Functions

Page: 339 / 508

21.1 Operation Log Function
21-6
Log File
SRAM
Log data is stored in the SRAM area in binary format.
The SRAM area consumes a maximum of 64 kB and is capable of storing 512 log data.
After output to the CF card, the SRAM area is cleared and data storage in the area is resumed. The
next section describes when output to the CF card takes place.
CF Card
Timing of output to CF card
The output of log data from the SRAM area to the CF card takes place when:
• The SRAM area has become full (up to 64 kB/512 log data).
• The bit for output to CF card is set (ON) at the [Control memory] address.
• The [CF Card Removal] switch is activated.
• The CF card cover is opened.
Log File Storage Target and File Name
The following designates the location of where to store log files and their naming.
Storage Target File Name
Access folder\OPELOG\YYMMDD OPELOG_hhmmss.BIN
year, month, and day hour, minutes, and seconds
BITMAP
CARD
DSP
FONT
HDCOPY
JPEG
MSG
OPELOG
RECIPE
SAMPLE
DAT0000
OPELOG_103005.BIN
OPELOG_141002.BIN
MEMO
OPELOG_204250.BIN
080702
080703
080704
CF card Access folder
Operation logs