FE MONITOUCH V8 SERIES, Reference: Additional Functions

Page: 254 / 508

18 Network Camera
18-21
18
Authentication Setting
Authentication setting is made to permit or prohibit access from anonymous users.
This setting enables you to deny access from anonymous users.
* Login with the administrator-level user name and password is required to proceed to the
following tab window setting.
1. Click the [Setup] tab.
2. Go to the [Account] menu at the left of the screen. Click [Administrator].
3. In the [General Authentication] area, choose either [Permit access from guest users] or [Do not
permit access from guest users].
4. Click [Save] to save the setting made in the previous step.
Permit access from guest
users This option allows anyone to access the network camera
without the user name and the password.
Do not permit access from
guest users Whenever you attempt to access the network camera, the
authentication dialog appears. By entering the user name and
the password as registered, you are granted access to the
network camera.
1.
2.
4.
3.
When the option [Do not permit access from guest users] is checked, make the following settings in
the V-SFT software. As shown below, check [ Use basic authentication] and then enter the user
ID and the password as already registered. To see the registered user ID and password, refer to
“User Name and Password Check and Registration” page 18-24.