FE MONITOUCH V8 SERIES, Reference: Additional Functions

Page: 368 / 508

22 Security Function
22-11
22
Login/Logout
A switch for security level change can be created.
Setting Items
Make the setting in the [Main] tab window in the [Switch] dialog.
System Memory ($s)
The following describes the system memory associated with the security function.
Function: Security [Log In]
The login screen that is registered in the [Security Setting] dialog
([System Setting]
→
[Security setting]) is displayed.
[Log Out]
The security level is set to zero (0).
* Since the same screen is displayed continuously after the
execution of the logout function, it should be executed on a
lower-security screen. If this method is not desirable, the
SET_SCRN (for screen number change) should be used in
conjunction with the function in order to change the screen
at the time of a logout.
* For information on other setting items, refer to the V8 Series Reference Manual.
Address Description
$s1360 The current security level 0 - 15 specified when you log in to the system is stored.
$s1361 The current user ID specified when you log in to the system is stored.
$s1362
$s1363
$s1364