FE MONITOUCH V8 SERIES Reference: Additional Functions Download Page 173

Page: 173 / 508

14.1 Screen Data File Capacity Increased

14-6

Notes

• The screen BIN data size that can be stored on a CF card is 512 kB maximum per file.

The size of each screen BIN data can be viewed by selecting [Tool]

→

[List of Memory Use].

However, the sizes of the screen BIN data to be saved on a CF card according to the [CF Card
Setting] dialog (select [System Setting]

→

[CF Card Setting]) are not displayed in this list.

Check the data size before setting the [CF Card Setting] dialog.

• The screen BIN data stored on a CF card may take longer before the screen appears on the

MONITOUCH than the one stored in the MONITOUCH memory.
Please keep such a time lag in mind.

Step 5

Select [File]

→

[Put BIN File Back]. Alternatively, right-click and click [Put BIN File

Back].

Step 6

The dialog shown below is displayed.
Specify the location and the file name and click [Save].

Summary of Contents for MONITOUCH V8 SERIES





























































































































































































































































































































































































































































































































Search results

Summary of Contents for MONITOUCH V8 SERIES

Reviews:

Brands by name

Popular brands

FE MONITOUCH V8 SERIES, Reference: Additional Functions

Search results

Summary of Contents for MONITOUCH V8 SERIES

Reviews:

Brands by name

Popular brands