manualshive.com logo in svg

FE MONITOUCH V8 SERIES, Reference: Additional Functions

Share
Download
FE MONITOUCH V8 SERIES Reference: Additional Functions Download Page 168

14.1    Screen Data File Capacity Increased

14-1

14

14 CF Card

14.1 Screen Data File Capacity Increased

Overview

• When the data of the following items included in the screen data file is saved on a CF card, the 

memory space of the MONITOUCH can be used sparingly.

• Screen BIN data
• Windows fonts
• 3D parts

• If you store data for the items that would occupy a large memory space, such as Windows fonts or 

3D parts, on a CF card, you can reduce the MONITOUCH memory space required for elaborate 
screen configuration.

Storing Screen BIN Data

Setting Procedure

Store screen BIN data on a CF card as shown below.

1. Editor settings

A maximum of 4,000 screens can be registered in the range of Nos. 0 - 9999.

Step 1

Select [System Setting] 

→

 [CF Card Setting].

The [CF Card] dialog is displayed.

Summary of Contents for MONITOUCH V8 SERIES





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands