FE MONITOUCH V8 SERIES, Reference: Additional Functions

Page: 396 / 508

23 Macro
23-27
23
• $s1059 stores the result of macro execution.
When the execution of the macro is normally complete, the value at the address is not updated.
Therefore, before macro execution, resetting the value at the address to zero is recommended.
* When reading from [F0] and [F1] ends in failure, an error occurs and “
−
1” is stored in $s1059.
When an execution error occurs, it is regarded as a fault.
CF Card (Sampling)
SMPL_CSV2
Function: CSV file creation (file name designation)
This macro command is used to convert the sampling data in buffering area No. [F0] into the CSV file
format under the name [F1] and saves the file in the SAMPLE folder in the CF card.
If the specified file does not exist, a new file will be created.
Available memory
: Setting enabled (indirect designation disabled)
: Setting enabled (indirect designation enabled)
Range
File
Storage target: \access folder\SAMPLE
File name:
xxxxxxxx.csv
Example
• The file named “SEISAN.CSV” is created in buffering area No. 1.
$u00100 = ’SEISAN’ (STRING)
SMPL_CSV2 1 $u00100
Code (DEC) Contents
−
1 Execution error*
Internal Memory
PLC1 - PLC8
Memory
Memory Card Constant
F0
F1
Value
F0 0 to 11: Buffering area number
F1 ASCII code (64 one-byte uppercase alphanumerics at the maximum): CSV file name
If [ Insert/Overwrite together with STRING Command] is checked in the [Memory
Setting] or [Macro Editing Support] dialog, the macro command STRING can also be
registered.
For more information on the STRING command, refer to the Macro Reference Manual.
Buffering area number designation
File name designation