FE MONITOUCH V8 SERIES, Reference: Additional Functions

Page: 49 / 508

2 Global Overlap
2-4
[Detail] Tab Window
* If you select [System Setting]
→
[Device Communication Setting]
→
[Read/Write Area] and
check [ GD-80 Compatible Read/Write Area], the setting for [ Command Memory]
becomes invalid.
Coordinate
Designation This is valid only when [External] is selected for [Designate].
A memory address of [Info Output Memory] “n + 2” or “n + 3” is
automatically allocated.
Checked:
Specify the coordinate position where the overlap display is shown from
the memory.
[Info Output Memory] “n + 2”: X coordinate
[Info Output Memory] “n + 3”: Y coordinate
Unchecked:
The overlap display is shown in the same position as it is placed for the
overlap library.
Command
Memory * Checked:
Specify one word of memory as desired.
This is used for showing or hiding the overlap display according to the
data in the specified memory address.
However, it is not possible to use bit 3 of read area “n + 1” for showing or
hiding the overlap display.
Unchecked:
Bit 3 of read area “n + 1” is used at all times.
Item Select
Memory This is required when using “entry mode” on the overlap screen.
For more information, refer to the V8 Series Reference Manual.
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1: Show
0: Hide
Not used (Be sure to set “0”.)