Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 90 / 222

5.5 Checking the hydraulic oil level
NOTICE!
Components may get damaged!
– Check the hydraulic oil level at
room temperature (approx. 20 °C
(68 °F)).
– If, during the daily inspection of
the oil level the hydraulic oil level
is found to have dropped, check
all lines, hoses and components
for leaks.
– Use only oil of the permitted
specification
Ä
Chapter 8.3.4
„Hydraulic oil“ on page 146 .
– In hydraulic systems filled with
Panolin HLP Synth. 46 always
use the same oil to top up. With
other ester based oils consult the
lubrication oil service of the
respective oil manufacturer.
Protective equip-
ment:
n
Working clothes
n Protective gloves
1. Check the oil level in the inspection glass.
Normal level approx. 3 cm (1.2 in)
below the top edge of the
inspection glass
Minimum level Middle of inspection glass
2. For topping up, clean the area around the
filler opening.
3. Unscrew the cap and fill in hydraulic oil.
4. Close the cap.
Fig. 42
Tests before taking into operation – Checking the hydraulic oil level
BW 213 D-5 90