Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 205 / 222

Protective equip-
ment:
n Working clothes
n Protective gloves
n Safety goggles
1. Switch off all consuming devices (e.g. igni-
tion, light).
2. Measure the open-circuit voltage of the
battery at regular intervals (at least 1 x per
month).
ð
Reference values: 12.6 V = fully
charged; 12.3 V = discharged to 50%.
3. Recharge the battery immediately after an
open-circuit voltage of 12.25 V or less is
reached. Do not perform boost charging.
ð
The open-circuit voltage of the battery
occurs approx. 10 hours after the last
charging process or one hour after the
last discharge.
4. Switch off the charging current before
removing the charging clamps.
5. After each charging process allow the bat-
tery to rest for one hour before taking it into
service.
6. For standstill periods of more than one
month you should always disconnect the
battery. Do not forget to perform regular
open-circuit voltage measurements.
8.11.9.3 Measures before restarting
1. Replace the fuel filter.
2. Replace the air filter.
3. Change engine oil and oil filter.
4. With storage times in excess of four
months the
®
/DEF container should be
drained and refilled completely with new
AdBlue
® /DEF.
Maintenance – As required
BW 213 D-5 205