Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 209 / 222

9.2 Starting the engine with jump leads
NOTICE!
A wrong connection will cause
severe damage in the electric
system.
– Bridge the machine only with a
12 Volt auxiliary battery.
1. Connect the plus pole of the external bat-
tery first with the plus pole of the vehicle
battery using the first jump lead.
2. Then connect the second battery cable first
to the minus pole of the current supplying
auxiliary battery and then to engine or
chassis ground, as far away from the bat-
tery as possible.
3. Start the engine
Ä
Chapter 6.3 „Start the
engine“ on page 99 .
NOTICE!
Danger of damage to the elec-
tronic system!
If no powerful consumer is switched
on voltage peaks may occur when
separating the connecting cables
between the batteries, which could
damage electrical components.
4. Once the engine is running switch on a
powerful consumer (working light, etc.).
5. After starting disconnect the negative poles
first and the positive poles after.
6. Switch off the consumer.
Fig. 180
Trouble shooting – Starting the engine with jump leads
BW 213 D-5 209