Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 185 / 222

Protective equip-
ment:
n Working clothes
n Protective gloves
1. Move the drum, until the oil level inspection
plug is in bottom position.
2. Park the machine in secured condition
Ä
Chapter 6.7 „Park the machine in
secured condition.“ on page 115 .
3. Clean the area around the level inspection
plug and unscrew the plug.
4. Drain and catch all oil.
5. Move the drive wheel, until the oil level
inspection plug is in horizontal position.
6. Fill in oil through the inspection bore, until it
starts to run out through the level inspec-
tion bore.
7. Turn the level inspection plug tightly back
in.
8. Change the oil in both wheel hubs.
9. Dispose of oil environmentally.
8.9.6 Change the oil in the exciter housing
NOTICE!
Components may get damaged!
– Drain gear oil only at operating
temperature.
– Use only gear oil of the permitted
specification
Ä
Chapter 8.3.5
„Gear oil SAE
75W-90“ on page 147 .
– Filling quantity:
Ä
Chapter 8.4
„List of fuels and lubri-
cants“ on page 148 .
Fig. 145
Fig. 146
Maintenance – Every 1000 operating hours
BW 213 D-5 185