Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 111 / 222

8. For the second pass press push button
“Start measurement” to start the measuring
pass when reaching mark 1.
ð
The measuring pass will be continued.
9. Keep repeating these passes, until there is
no considerable increase in the E
VIB
value.
ð
The LED above the “Stop measurement”
button lights up, if the E
VIB
value does
not increase more than 10% in compar-
ison to the previous pass.
10. Change to the next track and repeat this
whole process of recording measuring
values.
11. Press the “Stop measurement” button to
end a measuring pass.
ð
The LED of the printer icon lights up and
indicates, that the measuring report can
be printed.
12. Press the “Print measuring report” button to
print out a measuring pass.
ð
– short actuation: Line dia-
gram
– long actuation (> 5 s): Bar
chart
Fig. 72
Fig. 73
Fig. 74
Fig. 75
Operation – Terrameter
BW 213 D-5 111