Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 200 / 222

Protective equip-
ment:
n Working clothes
n Protective gloves
1. If the "water in fuel" warning lamp lights up
when starting or during operation, drain the
water from the fuel pre-filter immediately.
2. Park the machine in secured condition
Ä
Chapter 6.7 „Park the machine in
secured condition.“ on page 115 .
3. Slacken the drain plug and catch running
out fluid.
4. Turn the plug tightly back in. Check for
leaks, if necessary use a new seal ring.
ð
Once the water separator is empty the
warning lamp for water in fuel must go
out.
5. Dispose of collected fluid in an environ-
mentally friendly way.
8.11.3 Retightening the padfoot shell
After the installation of the padfoot shell, all fas-
tening screws must be retightened.
1. Run an approx. two minute test drive with
vibration.
2. Park the machine in secured condition
Ä
Chapter 6.7 „Park the machine in
secured condition.“ on page 115 .
3. Retighten all fastening screws.
4. After approx. 60 minutes work retighten all
fastening screws again.
Fig. 169
Fig. 170
Fig. 171
Maintenance – As required
BW 213 D-5 200