Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 166 / 222

4. Thoroughly clean the outside of the oil filter
cartridge.
5. Unscrew the oil filter cartridge using an
appropriate filter wrench.
6. Clean the sealing face on the filter carrier
from any dirt.
7. Slightly oil the rubber seal on the new oil
filter cartridge.
8. Spin the new oil filter cartridge on and
tighten it hand-tight.
9. Fill in new engine oil.
10. After a short test run check the oil level on
the dipstick; if necessary, top up to the top
dipstick mark.
11. Check oil filter cartridge and drain plug for
leaks.
12. Dispose of oil and oil filter cartridge envi-
ronmentally.
Fig. 123
Fig. 124
Maintenance – Every 500 operating hours
BW 213 D-5 166