Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 213 / 222

9.4 Engine faults
Fault Possible cause Remedy
Engine does
not start or
starts poorly
Fuel tank empty Refuel, bleed the fuel system
Temperature below starting
limit
Check
Cold starting facility Check, replace if necessary
Engine oil with wrong SAE
viscosity class
Change the engine oil
The fuel quality does not
meet the requirements
Change the fuel
Battery defective or not
charged
Check
Cable to starter loose or oxi-
dized
Check cable connection
Starter defective or pinion
does not engage
Check starter
Air filter clogged / exhaust
turbocharger defective
Check, replace if necessary
Air in the fuel system Bleed the fuel system
Compression pressure too
low
Check
Exhaust gas counter pres-
sure too high
Check
Injection line leaking Check
Engine does
not start and
diagnostic
lamp is
flashing
Engine electronics prevent
starting
Check fault by fault code,
repair as necessary
Engine starts,
but runs irreg-
ularly or mis-
fires
Exhaust gas counter pres-
sure too high
Check
Compression pressure too
low
Check
Cold starting facility Check, replace if necessary
Trouble shooting – Engine faults
BW 213 D-5 213