Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 130 / 222

7.4 Loading by crane
Loads must only be attached and hoisted by an
expert / capable person.
Do not use damaged or in any other way
impaired lashing points.
Use only lifting gear and lifting tackle with suffi-
cient load bearing capacity for the weight to be
loaded. Minimum load bearing capacity of
lifting gear: see max. operating weight
Ä
Chapter 2 „Technical data“ on page 15 .
Always use appropriate lifting and lashing
means on the lifting and lashing points.
Use lifting and lashing gear only in the pre-
scribed direction of load application.
Lifting and lashing gear must not be damaged
by machine components.
When lifting the machine avoid uncontrolled
movements of the load. If necessary, hold the
load with guide ropes.
1. Shut down the engine.
2. Engage the articulation lock
Ä
Chapter
8.2.2.1 „Engaging the articulation
lock“ on page 137 .
3. Fasten the lashing tackle at the marked
lifting points.
4. Adjust the length of the lifting tackle in such
a way, that the crane hook is vertically
above the centre of gravity of the machine.
5. Use a suitable cross-beam to prevent the
machine from being damaged.
Fig. 97
Loading/transporting the machine – Loading by crane
BW 213 D-5 130