Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 214 / 222

Fault Possible cause Remedy
Air in the fuel system Bleed the fuel system
Fuel pre-cleaner soiled Check, clean the water sepa-
rator, replace the fuel pre-
cleaner
The fuel quality does not
meet the requirements
Change the fuel
Injector defective Replace
Injection line leaking Check
Speed
changes are
possible and
central
warning lamp
lights
Engine electronics detected a
system fault and activates a
substitute speed
Check fault by fault code,
repair as necessary
The engine
overheats, the
coolant tem-
perature
warning lamp
lights
Ventilation line to the coolant
compensation tank clogged
Clean
Engine oil with wrong SAE
viscosity class
Change the engine oil
Engine oil cooler defective Check, replace if necessary
Engine oil filter dirty Replace
Engine oil level too low or too
high
Check, top up or drain off as
necessary
Injector defective Replace
Radiator soiled Clean
Coolant pump defective (V-
belt torn or loose)
Check, whether torn or loose
Lack of coolant Check the coolant level, top
up if necessary.
Resistance in cooling system
too high / flow quantity too
low
Check the cooling system
Charge air pipe leaking Check
Intercooler soiled Clean
Trouble shooting – Engine faults
BW 213 D-5 214