Fayat Group BOMAG BW 213 D-5, Operating Instruction, Maintenance Instruction

Page: 201 / 222

8.11.4 Adjust the scrapers
1. Check adjustment and condition of front
and rear scrapers, if necessary adjust or
replace the scraper rubber.
2. In order to adjust the scrapers, slacken the
fastening screws (1) in the slots and push
the scraper towards the drum to contact.
3. Fasten the fastening screws again.
8.11.5 Filling the windscreen washer tank
1. Open the flap under the driver's seat on the
left hand side.
2. Check the fluid level in the provision con-
tainer, top up if necessary.
3. If there is a risk of frost, you may also fill
the provision container with an anti-freeze
mixture.
8.11.6 Replacing the paper roll in the printer
Use a new paper roll if a red stripe appears on
the paper.
1. Open the cover.
Fig. 172
Fig. 173
Fig. 174
Maintenance – As required
BW 213 D-5 201