FAW J6 Jiefang IV Series, Operation Manual

Page: 77 / 217

69
Jiefang J6 China IV, China V series instruction
S
im
p
le
in
spec
tio
n
a
n
d
m
a
in
te
n
a
n
ce
Maintenance
Maintenance steps of cyclone tube rough filter
module
③
:
- Remove the main filter element
①
and the
secondary filter element
②
, and disconnect the air
outlet from the engine or block it with clean
materials.
- Open the ash storage basin
④
and clean up the
dust inside the ash basin.
- Repeatedly blow with compressed air, or clean up
the dust deposited in each part of the swirl tube
module
③
with a brush.
Oil bath filter
Maintenance of primary oil bath air filter:
- In the general regions, change the engine oil of the
same model as the engine used during the same
period every 250h driving; in the frequently heavy
sand storm regions or dust regions, the above oil
change maintenance interval should be halved.
- If the engine oil is not easy to flow when the drain
pan
④
is shaken, clean the oil bath filter element
and change the oil. Check this every day in the
harsh working conditions.
Maintenance of primary filter element:
- Every 750h driving: service the main filter
element
①
; in the complex and harsh environment
(dusty, humid), the above interval should be halved;
- Change the main filter element every 3000 hours
or a year. In complex and harsh environments
(dusty and humid), the maintenance interval is
reduced by half.
Maintenance of secondary filter element:
- Secondary filter element
②
is replaced with the
main filter element. No maintenance is required
during the period.