48
Jiefang J6 China IV, China V series instruction
Correct operation
Overturn mechanism of the cab
Warning
⊙
Before the cab is turned over, the vehicle shall
be parked on the horizontal surface, and the
transmission shall be placed in neutral position, and
the manual valve shall be pulled up, the door shall
be closed, and the outer panel of front wall shall be
open.
⊙
During the turnover and fall-back of the cab, no
body can be allowed in the front and rear of the cab.
⊙
The cab must be turned over to the maximum
angle. Do not start the engine and other operations
when driving does not reach the maximum turnover
angle.
⊙
After the cab falls back, it is necessary to
confirm that the cab is locked. The vehicle can be
driven only after confirming that the cab turnover
alarm lamp is off.
During driving, the reversing lever must be in the
fall- back position of the cab.
Caution
⊙
Before driving, the position of the reversing rod
on the oil pump should be checked and confirmed.
⊙
Be sure to keep the environment clean during oil
filling, so as to avoid dust, fiber, feather and other
foreign matters into hydraulic oil.
⊙
The working medium of the overturn
mechanism is No. 10 aviation hydraulic oil, and
other types of oil shall not be mixed.
⊙
When washing vehicles or repairing engines,
special attention should be paid to avoid damaging
oil pipes and wires in the system. No water is
allowed to enter the oil filling port of the oil pump.
⊙
The continuous operation of electric drive pump
shall not exceed five times (although the protection
circuit of motor is set internally, the excessive heat
will reduce the service life of the motor).
Summary of Contents for J6 Jiefang IV Series
