203
Jiefang J6 China IV, China V series instruction
Maintenance
Lu
b
rica
tin
g
o
il
- Turn over the cab and will see the oil filler
opening. Add new lubricating oil so that the oil
level reaches the upper limit of the oil scale.
- After the engine starts, idles for several minutes
and stops for 30min, check the oil scale and the oil
level shall be between the two marks.
Oil quantity
- Replace oil only: (34. 5 ~ 35) L.
- At the same time change the oil and oil filter:
(38.5
~
39)L.
Oil (CA6DM2 engine)
- Release long-acting super diesel engine oil,
(viscosity grade: 10W-40), which is suitable for
ambient temperature (-25-40)
℃
.
Oil (CA6DM3 engine)
- Mobil Black Overlord MX Extra CI-4/10W-40 is
suitable for ambient temperature (-25
~
40)
℃
.
40
℃
Warning
⊙
As oil viscosity is greatly influenced by
temperature, the oil with the proper viscosity should
be selected according to the ambient temperature.
⊙
The short-term ambient temperature is lower
than applicable the temperature range of oil, which
will affect the starting performance, but will not
cause harm. However, if unsuitable oil is used for a
long time, the engine wear will be accelerated.
Summary of Contents for J6 Jiefang IV Series
