FAW J6 Jiefang IV Series, Operation Manual

Page: 44 / 217

36
Jiefang J6 China IV, China V series instruction Correct operation
Steering wheel lock handle
The steering wheel lock handle is on the steering
column. Firstly, the locking handle is pulled
counterclockwise according to the figure above,
until the locking handle is released, the position of
the steering wheel can be adjusted.
The steering wheel can slide and swing forward
and backward. The adjustment distance between
upper and lower is 65.1 mm, and the adjustment
angle between front and rear is ±5.5° mm.
After adjustment, the lock handle is pulled
clockwise until the lock handle is locked.
Parking brake valve (referred to as manual
valve)
The brake valve is located on the dashboard.
When braking, pull the left brake valve back to
the bottom.
When the brake is released, lift the manual valve
control lever 1 upward, and push the handle forward
to the bottom.
In case of emergency, parking braking can be
used as emergency braking, but the service braking
cannot be replaced for a long time.
Caution
⊙
Before loosening the manual valve, confirm that
the air pressure has reached 0.055MPa. Do not force
to start.
⊙
After long-term parking, when the air pressure
of the air storage tank drops below 0.5 MPa, the
re-charging must reach 0.75 MPa before the parking
brake can be released.